Do it yourself
Frequently asked questions about cars and motorcycles

Installing iPhone, iPod, and AUX Adapter

Model: Toyota Celica T230 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Accessory kit

See other generations:
Video tutorial

To perform this operation, first extract the radio from its position safely, ensuring nothing is damaged. Once the radio is removed and disconnected, run the cable from side to side and reconnect the original power cable, antenna cable, and the new jack to the radio.

After testing everything, slide the radio back into its slot, keeping the AUX cable taut to prevent it from bunching at the bottom of the radio. Reposition the plastic caps over the holes in the radio and connect your iPhone and iPod.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Toyota Celica (1999-2006 / T230) To replace the entire rear light cluster, access the fastening screws located on the side of the boot, after removing the cover by prying with a plas…
Toyota Celica (1999-2006 / T230) To remove the front bumper of the Toyota Celica, open the bonnet to access the screws securing the bumper at the top. Once these screws are loosened,…
Toyota Celica (1999-2006 / T230) In this video, you can see where the fuse boxes of the Toyota Celica are located and their respective diagrams, useful in case you need to check the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos