Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Cover of a Toyota Corolla

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Key

In this video, you will learn how to replace the key cover of a Toyota Corolla. Purchase the new key case and obtain a flathead screwdriver. Use the screwdriver to pry open the cover into two parts. You can now remove the battery and the chip from the old key; handle the chip carefully to avoid damaging sensitive parts. Open the new cover and insert the chip along with the battery inside. If necessary, solder some parts of the chip connected to the cover using small pins. Close the new key shell and test it.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Corolla (2019-2026 / MK 5, E210) Replacing the battery in your Toyota Corolla key takes just a few seconds and can be done independently. Follow the instructions provided here. First…
Toyota Corolla (2000-2007 / MK 2) If you own a Toyota Corolla Matrix (2000-2007) and want to replace the button battery inside the key, follow the instructions in this guide. First, g…
Toyota Corolla (2019-2026 / MK 5, E210) If you want to replace the battery inside your Toyota Corolla E210 key yourself, follow these simple steps outlined in this guide. First, purchase a …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos