Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Toyota Camry

Model: Toyota Camry Xv30 - Years 2002-2006
Part: Warning light – error code

Before discovering how to correctly reset the maintenance light on a Toyota Camry, ensure you check the total mileage displayed on the mini display of the onboard computer. Then, turn off the car. Locate the button just below the speedometer and press it. At the same time, turn on the ignition and wait for the display to stop flashing. After that, release the button and the reset is complete. From the next start, the maintenance light will no longer appear. If there are any errors, you can simply repeat the entire procedure.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on a 2016 Toyota Camry
How to Reset the Maintenance Light on a 2016 Toyota Camry
Toyota Camry (2011-2019 / Xv50) Manually resetting the maintenance light on your 2016 Toyota Camry is very simple, and with the following guide, you will complete the operation with…
How to Reset the Maintenance Light on a Toyota Camry
How to Reset the Maintenance Light on a Toyota Camry
Toyota Camry (2018-2024 / Xv70) Manually resetting the maintenance light on a 2019 Toyota Camry is very simple and takes only a few seconds to complete the entire operation correctl…
How to Reset the Maintenance Light on the 2007 Toyota Camry
How to Reset the Maintenance Light on the 2007 Toyota Camry
Toyota Camry (2006-2013 / Xv40) In this new mini guide dedicated to your 2007 Toyota Camry, learn how to manually reset the maintenance light that appears on the instrument panel. F…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos