Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on a Toyota Rav 4

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Battery

See other generations:
Video tutorial

This brief and simple guide shows you how to remove and replace the battery on a Toyota Rav 4. First, open the bonnet and start by removing the plastic cover found at the top left, taking out the various clips. Then disconnect both battery terminals (positive and negative) by unscrewing the bolts with a 10 mm spanner.

Next, remove the two central nuts from the bracket, lifting and extracting the battery; finally, replace it with a new one of the correct type and with the same amperage!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Toyota RAV 4?
How to Replace the Remote Battery of the Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the remote battery of the Toyota RAV 4, move the lever located at the bottom of the device: this will allow you to extract the key from it…
Replacing the Key Remote Battery for the Toyota RAV4
Replacing the Key Remote Battery for the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In a few simple steps, we will see how to disassemble and replace the battery of the key remote for the Toyota RAV4. First, take your remote and star…
How to Replace the Remote Battery of the Toyota RAV 4?
How to Replace the Remote Battery of the Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the remote battery of the Toyota RAV 4, lower the lever located at the bottom of the device: this will allow you to extract the key from i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos