Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Toyota 4Runner

Model: Toyota 4runner N280 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

If you are looking for a simple and quick method to turn off the oil change warning light on your Toyota 4Runner, just follow this mini guide carefully. First, press the "Start" button twice in quick succession.

Then, locate the button just below the speedometer and press it several times until you see "Trip A" on the mini display of the onboard computer. Turn off the ignition.

Hold down the same button as before and simultaneously press the "Start" button twice. The reset is complete.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure light on the Toyota 4Runner?
How do you reset the tire pressure light on the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) You can completely remove the tire pressure warning light from the Toyota 4Runner instrument panel by inflating the tires to the recommended pressure…
How to Reset the Service Light on a Toyota 4Runner
How to Reset the Service Light on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle …
How to Reset the Service Light on a Toyota 4Runner?
How to Reset the Service Light on a Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) In this tutorial, you will learn how to reset the service light on a Toyota 4Runner. This operation is extremely simple and quick, and should only be…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos