Do it yourself
| ||||
|
Toyota C Hr - Video tutorial
Model: Toyota C Hr
Ax10, Ax50, MK 1
- Years 2016-2023 In this tutorial we can see how to reset the low tire pressure warning light in the Toyota CH-R, an operation to be carried out only after restoring the correct pressure of each tire following, for example, a puncture. To do this, we turn on the instrument panel and enter the settings menu, using the directional arrows on the left side of the steering wheel. Subsequently, we go down, select "vehicle settings" and carry out the reset by holding down the "OK" button for the necessary time. Finally, we can restart the framework and verify that the procedure has been carried out correctly.
Posted on 13 April 2024 by ScegliAuto
How do you reset the tire pressure warning light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, Ax50, MK 1) In order to reset the tire pressure warning light of the Toyota C-HR, you need to adjust all the tires to the recommended inflation pressure: this va
How do you reset the tire pressure warning light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, Ax50, MK 1) The tire pressure warning light reset operation on the Toyota C-HR is done by turning on the instrument panel, so that you can navigate within the me
How do you reset the tire pressure warning light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, Ax50, MK 1) On the Toyota C-HR, the tire pressure warning light can be reset by first inflating the tires to the recommended pressure value: this value is indica Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the Renault Master AdBlue warning lightIf when you turn on the ignition you see a strange warning relating to AdBlue, do not worry because it is nothing serious. Everything is solved in a few minutes and with a very low cost. In fact, it is a particular additive used in Diesel engines to reduce the environmental impact. Before continuing with the various steps it is therefore necessary to purchase a tank of AdBlue. Furthermore, all the various operations must be carried out with the engine off. The AdBlue tank is located on the passenger side, between the door and the tailgate. Unscrew the blue cap present and pour in the new AdBlue with the help of a rubber hose or an appropriate funnel. Once this is done, you can close the tank and the flap. Switch on the ignition again and the warning light has disappeared. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |