Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Toyota Highlander

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Warning light – error code

In this short video tutorial, we will see how to reset the maintenance light on a Toyota Highlander. This operation should only be performed after completing the service, and it can be done independently. Start by turning on the instrument cluster without starting the vehicle. Now, press the button located on the right side of the speedometer, below the odometer, until you reach the "TRIP" option. Once there, hold down the button and turn off the vehicle. Wait a few seconds, then turn on the instrument cluster again; this will start the reset of the light. Wait for the reset to complete, and you have finished the job.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Toyota Highlander
How to Reset the Maintenance Light on the Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) Manually resetting the maintenance light on the instrument cluster of your Toyota Highlander (latest model) is really simple, and you just need to fo…
How to reset the maintenance light on the 2017 Toyota Highlander
How to reset the maintenance light on the 2017 Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) If you want to reset the maintenance light on the instrument panel of your 2017 Toyota Highlander on your own, all you have to do is follow these sim…
How to Reset the Maintenance Light on a 2024 Toyota Highlander
How to Reset the Maintenance Light on a 2024 Toyota Highlander
Toyota Highlander (2020-2026 / Xu70) If you own a 2024 Toyota Highlander and want to know how to correctly perform the manual reset of the maintenance light, follow these steps. First, t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos