Do it yourself
Frequently asked questions about cars and motorcycles

Oil Change on a Toyota Camry

Model: Toyota Camry Xv50 - Years 2011-2019
Part: Engine oil

In this tutorial video, discover how to change the oil on a Toyota Camry. The model shown in the video is a 2012 with a 2.5-liter 4-cylinder engine. Start by lifting the car and removing the oil pan bolt with a 14mm wrench. Allow all the old oil to drain, then replace the bolt. Next, move to the side of the pan and remove the filter cartridge, where you will find the old filter to replace. Replace the filter and gasket, then reassemble everything. Once done, move to the engine bay and add new oil to complete the job.

Updated on 10 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Toyota Camry (2006-2013 / Xv40) The video shows how to check the engine oil and transmission fluid on a 2006-2009 Toyota Camry 2.4. It is a very simple operation that can be done by…
Toyota Camry (2002-2006 / Xv30) In this new mini guide for all Toyota Camry XV 30 owners, you will learn how to properly reset the engine oil light that stays on in the dashboard. F…
Toyota Camry (2011-2019 / Xv50) To change the engine oil filter in a Toyota Camry, lift the front of the vehicle using a jack and place safety stands. Position a container under the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos