Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Steering Wheel Airbag of the Toyota RAV 4?

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Airbag

To remove the steering wheel airbag of the Toyota RAV 4, loosen the bolts located on the rear side of the steering wheel, on both the left and right sides. By unscrewing these bolts, you can then pull the airbag out of its housing and disconnect the connectors located at the back of the unit. Once the connectors are removed, you can completely take out the airbag to connect a new one, insert it into its housing, and secure it with the side bolts.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2013-2018 / MK 4, Xa40) Today, we will go through the instructions for removing and replacing the steering wheel of the Toyota RAV 4, following the instructions below. First…
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Do you want to remove the steering wheel on a Toyota Rav 4? Here’s how to take off the steering wheel and airbag. Insert a screwdriver or a suitable …
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In this guide, we will see how to remove and replace the steering wheel, along with its airbag, of the Toyota Rav 4, following the instructions below…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos