Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the Service Reset on a Toyota Rav 4.

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, see how to perform the service light reset. Before carrying out the manual reset procedure for the maintenance light, you must change the oil and filters.

First, get into your vehicle and locate button 1 at the bottom left of the speedometer. For vehicles with a Start and Stop button: press the Start and Stop button twice with the gear engaged and the clutch released.

TURN OFF: press the START/STOP button once with the gear engaged and the clutch released. RESET PROCEDURE: Close all vehicle doors; turn on the ignition and press button 1 until you reach the TRIP A option.

Turn off the instrument cluster; press button 1 and turn on the ignition with the button pressed for at least 10 seconds and wait for the complete reset. Release the button and turn off the ignition.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

Resetting the Service Indicator on the Toyota RAV 4
Resetting the Service Indicator on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) The information below will guide you on how to reset the service light for the regular maintenance oil change on the Toyota RAV 4. First, get inside …
Resetting the Service Light on the Toyota RAV 4
Resetting the Service Light on the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Today's instructions will guide you through resetting the service light for the regular maintenance of the engine oil change on the Toyota RAV 4. Fir…
Resetting the Service Light on the Toyota RAV 4
Resetting the Service Light on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Today, we will go through the instructions to reset the service indicator on the Toyota RAV 4. First, get inside the vehicle and turn on the instrume…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos