Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Toyota RAV4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Warning light – error code

To manually reset the maintenance light on your Toyota RAV4, you will need just a few seconds. The entire operation is very straightforward and can be done independently. First, insert the key and turn it to position two. Start the ignition and immediately navigate through the onboard computer menu until you see the partial/total kilometres travelled. At this point, press and hold the button located below the rev counter and release it after a few seconds. The reset of the light is now complete, but if there are any errors, simply turn off and turn on the ignition again to restart the reset procedure.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Toyota RAV 4
How to Reset the Maintenance Light on the Toyota RAV 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Today's guide will show you the procedure needed to reset the service light for the regular maintenance oil change on the Toyota RAV 4. First, get in…
How to Reset the Oil Maintenance Light on a Toyota RAV 4
How to Reset the Oil Maintenance Light on a Toyota RAV 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In today's tutorial, you will learn how to reset the oil maintenance light on a Toyota RAV 4. First, get in the car and turn on the ignition, then pr…
How to Reset the Service Light on the Toyota Rav 4 MK5
How to Reset the Service Light on the Toyota Rav 4 MK5
Toyota Rav 4 (2019-2026 / Xa50, MK 5) This guide shows you the steps to reset the service light for the routine maintenance oil change on the fifth series Toyota Rav 4, following the inst…

Other guides you may be interested in

    Frequently Asked Questions

    • Rav 4 2006-2013 - What does the Toyota Rav4 P / S warning light mean? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos