Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Motor in the Toyota Highlander

Model: Toyota Highlander Xu20 - Years 2001-2007
Part: Blower motor

This guide provides instructions to remove and replace the cabin fan motor in the Toyota Highlander. First, get into the vehicle on the front passenger side and begin removing the lower side cover to access the cabin fan motor; then disconnect its electrical connector and use a Torx key to unscrew all its screws, as shown in the video. At this point, replace the cabin fan with the new one, reconnect the electrical connector, and then check its operation!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the Toyota Highlander?
What is the fuse diagram for the Toyota Highlander?
Toyota Highlander (2001-2007 / Xu20) If some of the devices in our Toyota Highlander have suddenly stopped working, we can first check the status of the corresponding fuses whose diagram…
How to Replace the Cabin Filter in the Toyota Highlander?
How to Replace the Cabin Filter in the Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) Replacing the cabin air filter in the Toyota Highlander is a very simple and quick task. Start by opening the glove compartment and disconnect the da…
How to Replace the Cabin Filter on the Toyota Highlander?
How to Replace the Cabin Filter on the Toyota Highlander?
Toyota Highlander (2001-2007 / Xu20) To replace the cabin filter on the Toyota Highlander, open the glove compartment located on the passenger side; then, detach the side clips securing …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos