Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing a Bluetooth Kit in Your Car

Model: Toyota Prius MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Accessory kit

See other generations:
Video tutorial

The following guide is for those who want to install Bluetooth in their car. The first step is to purchase a hands-free Bluetooth kit and decide where in the vehicle it should be mounted. The kit can be attached using an adhesive protective film.

Once the device is in place, it needs to be programmed and activated. When you enter the car, the connection will occur automatically upon starting the vehicle and will end when it is turned off. This procedure requires no loose wires or earpieces, just a convenient display.

Audio will be transmitted through the car's speakers.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Replacement of the Suspension Wishbone
Replacement of the Suspension Wishbone
Toyota Prius (2009-2015 / Xw30, MK 2) In case of failure of the ball joint or one of the bushes of the suspension wishbone, you can opt to purchase a repair kit or the entire wishbone. In…
Installation of LED Front Headlights
Installation of LED Front Headlights
Toyota Prius (2009-2015 / Xw30, MK 2) Replacing the front headlight bulbs with LED ones instead of Xenon will give the vehicle a much more modern look while significantly improving visibi…
Instructions for Installing LED Lights
Instructions for Installing LED Lights
Toyota Prius (2009-2015 / Xw30, MK 2) Installing LED bulbs in the cabin will give the vehicle a much more modern and appealing look; many manufacturers offer specific kits already prepare…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos