Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Installing LED Lights

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Accessory kit

See other generations:
Video tutorial

Installing LED bulbs in the cabin will give the vehicle a much more modern and appealing look; many manufacturers offer specific kits already prepared with the correct number and model of bulbs for the upgrade. The bulbs from this manufacturer can also be installed in any position, meaning you do not need to observe the polarity for them to light up. Start with the cabin light by detaching the transparent cover to access the bulb holder and replace the bulbs (T10 fitting); then move on to the other courtesy lights (also with T10 fitting) under the sun visor, in the centre of the headlining (sidelight), in the door panel, and in the boot, finishing with the number plate lights and the position lights of the front headlights.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Installation of LED Front Headlights
Installation of LED Front Headlights
Toyota Prius (2009-2015 / Xw30, MK 2) Replacing the front headlight bulbs with LED ones instead of Xenon will give the vehicle a much more modern look while significantly improving visibi…
Rear Light Disassembly Instructions
Rear Light Disassembly Instructions
Toyota Prius (2004-2009 / MK 1) To disassemble the rear light, you need to remove a significant portion of the internal trim of the boot on the side of the light to be removed. Star…
Instructions for Removing the Rear Bumper
Instructions for Removing the Rear Bumper
Toyota Prius (2004-2009 / MK 1) Removing the rear bumper is quite simple and does not require lifting the vehicle on a ramp or removing any elements like the rear wheels or headligh…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos