Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Bumper of the Toyota 4Runner

Model: Toyota 4runner N280 - Years 2010-2024
Part: Front bumper

To remove the front bumper of the Toyota 4Runner, open the hood to access the rivets that secure the bumper at the top. Once the rivets are removed, loosen the bolts that secure the bumper at the bottom. Finally, remove the bolts located inside the inner fender covers: when all these fasteners are removed, you can detach the front bumper from the vehicle and replace it with a new part.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota 4runner (2002-2009 / N210) This guide shows you how to remove and replace the front bumper on the Toyota 4Runner by following the instructions below. First, lift the vehicle an…
Toyota 4runner (2002-2009 / N210) In this tutorial, you will learn how to remove the headlights in the Toyota 4Runner, a very simple and quick operation. First, ensure the key is not …
Toyota 4runner (2010-2024 / N280) In today's video, we will see how to remove the front headlights and tint them on the Toyota 4Runner. Start by opening the hood. Remove the plastic c…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos