Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on the Toyota 4Runner

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Front bumper

See other generations:
Video tutorial

This guide shows you how to remove and replace the front bumper on the Toyota 4Runner by following the instructions below. First, lift the vehicle and start by removing the screws found on both sides of the wheel wells, as well as those located above and below the front bumper; then disconnect the electrical connectors for the front fog lights, as shown in the video.

At this point, gently unclip the bumper from the sides until you completely remove it from the front; replace it with the new one by applying the reverse procedure!


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Toyota 4Runner
How to Remove the Front Bumper of the Toyota 4Runner
Toyota 4runner (2010-2024 / N280) To remove the front bumper of the Toyota 4Runner, open the hood to access the rivets that secure the bumper at the top. Once the rivets are removed, …
Where to Find the Fuse Box in the Toyota 4Runner
Where to Find the Fuse Box in the Toyota 4Runner
Toyota 4runner (2002-2009 / N210) If you are experiencing issues with one or more electrical components in your Toyota 4Runner, don't worry because you can directly address them throu…
How to Replace the Radio in a Toyota 4Runner
How to Replace the Radio in a Toyota 4Runner
Toyota 4runner (1996-2002 / N180) In today's video, learn how to replace the radio in a Toyota 4Runner. First, gather a new device to install in your vehicle. Next, detach the dashboa…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos