Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote Battery of the Toyota Crysta?

Model: Toyota Innova Kijang Crysta An140 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

In this tutorial, you will see how to replace the remote battery of the Toyota Crysta. For this simple and quick operation, you will only need a replacement battery of type CR2032. First, use the rear button to extract the emergency metal key, then use it to pry in the indicated slot and separate the two halves of the remote.

Next, remove the internal circuit, on the back of which the battery is located. Finally, proceed with the replacement, ensuring that the replacement is positioned with the positive terminal facing you.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

Toyota Innova Kijang Crysta (2015-2023 / An140) If you need to replace the remote key battery for this vehicle, check the images in the video and read the instructions below. The first step is to e…
Toyota Innova Kijang Crysta (2015-2023 / An140) Today, learn how to disassemble and replace the battery in the key fob for the Toyota Innova Kijang Crysta in simple steps. First, take your key fob …
Toyota Innova Kijang Crysta (2015-2023 / An140) If the AdBlue warning light is on in your Toyota Innova Crysta's instrument cluster, it means the fluid level in the emissions system is too low and …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos