Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. HiLux
  6. : How do I replace the Toyota Hilux fuel filter?

Toyota HiLux - Video tutorial

Model: Toyota HiLux MK 8, An130, An120 - Years 2015-2023
Part: Petrol filter
Operation: How do I replace the Toyota Hilux fuel filter?

In order to replace the Toyota Hilux fuel filter, you have to go and open the hood, so that you have access to the components inside the engine compartment. The fuel filter will be located on the right side of the engine compartment, immediately next to the engine block. In order to remove the piece it will be necessary to loosen its fixing bolts and disconnect the pipes connected to it. Once the old filter has therefore been released, it will be possible to go and remove it from its seat, replacing it with a new one. This will need to be properly fixed and connected.


Posted on 21 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos