Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter in the Toyota Hilux pick-up?

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Diesel fuel filter

See other generations:
Video tutorial

In this tutorial, we can see how to replace the diesel filter in the Toyota Hilux pick-up, an extremely simple and quick operation. First of all, make sure the engine is sufficiently cold, then open the hood and locate the filter on the driver's side.

Disconnect the sensor connector, disconnect both tubes by releasing the respective clips, and unscrew the large outer ring. At this point, all that's left to do is to open the cap, remove the old filter, insert the replacement, and reassemble everything by simply following the reverse procedure.


Posted on 18 January 2025 by ScegliAuto


Related tutorials

How to reset the fuel filter warning light in the Toyota Hilux pick-up truck?
How to reset the fuel filter warning light in the Toyota Hilux pick-up truck?
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) In this tutorial we can see how to reset the fuel filter light in the Toyota Hilux pick-up, an extremely simple and quick operation to be carried out…
How to Reset the Fuel Filter Change Light on a Toyota Hilux
How to Reset the Fuel Filter Change Light on a Toyota Hilux
Toyota HiLux (2015-2024 / MK 8, An130, An120) These simple steps will show you how to reset the fuel filter change light on a Toyota Hilux. First, get in the vehicle and turn on the ignition; the…
How to reset the fuel filter indicator light on the Toyota Hilux 2.8L
How to reset the fuel filter indicator light on the Toyota Hilux 2.8L
Toyota HiLux (2015-2024 / MK 8, An130, An120) Today's information will allow us to reset the fuel filter change warning light on the Toyota Hilux 2.8L. First, we open the car's hood and start by …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos