Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the fuel filter warning light in the Toyota Hilux pick-up truck?

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Diesel fuel filter

See other generations:
Video tutorial

In this tutorial we can see how to reset the fuel filter light in the Toyota Hilux pick-up, an extremely simple and quick operation to be carried out in case of malfunction or only after solving the problem that causes it to light up. First of all, make sure that the instrument panel is turned off, then open the engine hood, locate the filter and disconnect the sensor connector.

Then turn on the instrument panel, wait about 20 seconds, reconnect the connector, restart the vehicle and verify that the procedure was successful.


Posted on 23 August 2025 by ScegliAuto


Related tutorials

How to replace the fuel filter in the Toyota Hilux pick-up?
How to replace the fuel filter in the Toyota Hilux pick-up?
Toyota HiLux (2005-2015 / MK 7, An10, An20, An30) In this tutorial, we can see how to replace the diesel filter in the Toyota Hilux pick-up, an extremely simple and quick operation. First of all, mak…
How to Reset the Fuel Filter Change Light on a Toyota Hilux
How to Reset the Fuel Filter Change Light on a Toyota Hilux
Toyota HiLux (2015-2024 / MK 8, An130, An120) These simple steps will show you how to reset the fuel filter change light on a Toyota Hilux. First, get in the vehicle and turn on the ignition; the…
How to reset the fuel filter indicator light on the Toyota Hilux 2.8L
How to reset the fuel filter indicator light on the Toyota Hilux 2.8L
Toyota HiLux (2015-2024 / MK 8, An130, An120) Today's information will allow us to reset the fuel filter change warning light on the Toyota Hilux 2.8L. First, we open the car's hood and start by …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos