Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. C Hr
    4. : How to reset the tire warning light on Toyota Chr

Toyota C Hr - Video tutorial

Model: Toyota C Hr Ax50, Ax10, MK 1 - Years 2016-2023
Part: Instrument cluster
Operation: How to reset the tire warning light on Toyota Chr

If, while driving, the low tire pressure warning light on the panel of our car comes on, it will be necessary to check the actual tire inflation pressure and, if necessary, restore the pressure specified by the manufacturer. After doing this operation, it will be necessary to reset the yellow warning light that came on on the instrument panel. To do this we need to access the passenger compartment and sit in the driver's seat, turn on the ignition and with the controls on the right side of the steering wheel scroll the functions of the on-board computer to "vehicle settings", then select "configuration", the computer it will ask us, if the tire pressure is now correct, to proceed with the update and to do this it is necessary to press the Ok button three times in succession, always located on the right side of the steering wheel and finally press it for the fourth time and keep it pressed until © the light does not go out.


Posted on 13 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Toyota C Hr 2016-2023 - What does the yellow engine light on the Toyota C-HR indicate? Read Answer
    • Toyota C Hr 2016-2023 - What does the service light on Toyota C Hr indicate? Read Answer
    • Toyota C Hr 2016-2023 - What does the AdBlue warning light on the Toyota C HR mean? Read Answer
    • Toyota C Hr 2016-2023 - What are the warning lights on the Toyota Chr? Read Answer
    • Toyota C Hr 2016-2023 - Where are the Toyota C-HR warning lights shown? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos