Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb of the Toyota Yaris XP10?

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Headlight bulb

In this video, we will show you how to replace the burnt dipped beam bulb of the front headlight in a first series Toyota Yaris. Open the bonnet, disconnect the power connector, and remove the dust cover of the headlight in question. Release the metal clips using a mirror to see better inside the headlight. Remove the worn bulb and replace it with a new one; specifically, it is an H4 incandescent bulb. Insert the new bulb into its position, reattach the clips with a bit of pressure, reposition the rubber cover, and reconnect the power plug. Job done!

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Toyota Yaris
How to Replace the Front Headlight Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) This short video will show you how to remove and replace the front headlight bulb on a Toyota Yaris, following these simple steps. First, open the bo…
Replacing the Rear Headlamp Bulb on a Toyota Yaris
Replacing the Rear Headlamp Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Today, learn how to remove and replace the rear headlamp bulb on a first-generation Toyota Yaris. First, open the boot and remove the plastic side co…
How to Replace the Front Headlight Bulb on a Toyota Yaris?
How to Replace the Front Headlight Bulb on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To replace the front headlight bulb on a Toyota Yaris, you need to open the bonnet to access the engine compartment. Once the bonnet is open, you wil…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos