Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How to replace the Toyota Yaris spark plugs?

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Spark plugs
Operation: How to replace the Toyota Yaris spark plugs?

In order to replace the Toyota Yaris spark plugs, you need to open the hood and lift the plastic cover of the front part of the engine: in this way it will be possible to access the coils below, which will have to be removed by loosening the relative screw for each coil. Once these have been disconnected, it will be possible to access the spark plugs which are located in the lower part and which must be extracted from their housing using a socket wrench. Once removed, they must be replaced with new spare parts and connected to the appropriate coils.


Posted on 3 June 2024 by ScegliAuto



Toyota Yaris spark plug replacement
Toyota Yaris (2005-2011 / Xp90) Today we will see, in this video tutorial, how to remove and replace the Toyota Yaris engine spark plugs, following these simple and quick steps. Fir
Removing the spark plugs on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) How to remove the Toyota Yaris spark plugs? Let's see how the Toyota Yaris spark plugs are removed. We raise the front hood, we secure the same. We r
How to replace the spark plugs in a Toyota Yaris.
Toyota Yaris (2005-2011 / Xp90) In today's video, we will see how to replace the spark plugs in the Toyota Yaris gasoline engine. We recommend proceeding with a cold engine to avoid

    Frequently Asked Questions

    • Yaris 2011-2019 - Toyota Yaris 1000 spark plugs cost? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos