Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Engine Warning Light on a Toyota Yaris?

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Warning light – error code

See other generations:
Video tutorial

In this tutorial, you will see how to remove the engine warning light on a Toyota Yaris, which requires the use of a specific scanner easily found online. Of course, before doing this, you must have resolved the issue that caused the light to come on. Start by connecting the scanner to the car's OBD port located above the accelerator pedal, then begin the error scan, enter the menu, and navigate to the "ERASE" section using the "Scroll" button.

At this point, start the reset procedure with the "Enter" button and press it again to complete it. Finally, perform a second scan, disconnect the cable, and start the vehicle.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2020-2026 / MK 4) The car model mentioned, the Toyota Yaris Hybrid, follows the method described below to cancel the tyre pressure warning light: after turning on the …
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will see how to reset the service light on the Toyota Yaris, a very simple and quick operation to perform only after completing…
Toyota Yaris (2020-2026 / MK 4) To reset the trip meter on the Toyota Yaris, turn on the ignition by inserting the key into the ignition switch and pressing the designated start but…

    Frequently Asked Questions

    • Yaris 2020-2027 - How do you reset the fuel level on a Toyota Yaris? Read answer
    • Yaris 2005-2011 - What does the Cool light on the Toyota Yaris mean? Read answer
    • Yaris 1999-2005 - What does the "engine failure" light on my Toyota Yaris mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos