Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Auris
    4. : How to reset Toyota Auris 2008 oil warning light

Toyota Auris - Video tutorial

Model: Toyota Auris E150 - Years 2007-2012
Part: Instrument cluster
Operation: How to reset Toyota Auris 2008 oil warning light

If every time you start your 2008 Toyota Auris the oil warning light on the instrument panel comes on even though you have already changed the fluid and filter, don't worry as you can easily clear it through the following manual reset procedure. First, locate and hold the button in the lower right corner of the picture and start the picture. Wait a few seconds and release the button as soon as the display confirms that the oil warning light has been reset. Finally, definitely turn off the picture and you are done.


Posted on 30 July 2022 by ScegliAuto

    Frequently Asked Questions

    • Auris 2018-2024 - What does the service light of the new Toyota Auris indicate? Read Answer
    • Auris 2007-2012 - How do you perform a system reset on a Toyota Auris? Read Answer
    • Auris 2007-2012 - What to do when the tire pressure warning light comes on on Toyota Auris? Read Answer
    • Auris 2012-2018 - What does the yellow engine light on the Toyota Auris 2 mean? Read Answer
    • Auris 2012-2018 - What are the warning lights on the dashboard of the Toyota Auris? Read Answer
    • Auris 2012-2018 - What spies does the Toyota Auris have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos