Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery on the New Toyota Highlander

Model: Toyota Highlander Xu70 - Years 2020-2026
Part: Key

If the battery in your car key is completely dead, you must replace it with a new one. First, remove the physical emergency key from the fob by pressing down the small button located on the back. Then, using the same key, gently pry upwards to remove the back cover. You will now see the old button cell battery. Simply take it out and replace it with a new compatible model. Finally, correctly reposition the back cover and reinsert the physical key.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Highlander (2014-2019 / Xu50) Replacing the remote battery of the Toyota Highlander is very simple. For this operation, you need a small flathead screwdriver and a replacement CR2…
Toyota Highlander (2014-2019 / Xu50) Replacing the remote battery on a Toyota Highlander, as seen in this tutorial, is an extremely simple and quick operation. For this, you will not nee…
Toyota Highlander (2014-2019 / Xu50) In this brief tutorial, see how to replace the battery (CR2016) in the remote control of a Toyota Highlander, produced from 2014 to 2019. To change t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos