Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Roof Lining in a Toyota Avensis 2?

Model: Toyota Avensis T250, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Checks and maintenance

See other generations:
Video tutorial

When the roof lining starts to deteriorate and the fabric panel detaches in some areas, it is necessary to replace it. To do this, gather a screwdriver, enter the cabin, and remove the following parts of the car: 1) rear and front interior lights 2) all upper handles 3) all window seals 4) all pillars 5) the two sun visors.

Once these elements are removed, you can finally detach the roof lining and extract it from the vehicle by taking it out through the (open) passenger door, then you can install a new roof lining.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box on the Toyota Avensis 3?
Where is the Fuse Box on the Toyota Avensis 3?
Toyota Avensis (2009-2018 / MK 3, T270) In this guide for your Toyota Avensis Mk3 (2009-2018), follow these steps. First, ensure the car is off, then go outside and position yourself at the…
Where is the fuse box located in the cabin of the Toyota Avensis 3?
Where is the fuse box located in the cabin of the Toyota Avensis 3?
Toyota Avensis (2009-2018 / MK 3, T270) To easily locate the fuse box in the interior of your third generation Toyota Avensis, simply read the following guide carefully and follow the steps…
How to Reset the Service Light on a 2012 Toyota Avensis
How to Reset the Service Light on a 2012 Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) Typically, the orange service light on your Toyota Avensis third generation (2009-2018) turns off automatically after the regular service is performe…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos