Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Expired Service Light on a Toyota C-HR?

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part: Service warning light

Resetting the maintenance light on a Toyota C-HR is very easy and does not require any tools. First, turn on the ignition to see the "maintenance" message and then turn off the ignition. Now, turn it back on and press the button located to the right of the steering wheel marked TMP: wait for the maintenance reset. Turn off the ignition with the appropriate button, then turn it back on to check that the maintenance has been completed (the light should no longer be illuminated). Always remember to make changes and settings on the Toyota with the vehicle stationary and the engine off.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Toyota C-HR?
How to Reset the Service Light on a Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) This light indicates that it is time for a service: after completing this maintenance task, you can reset it. The service light reset can be done wit…
How to reset the service light on the Toyota CH-R
How to reset the service light on the Toyota CH-R
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) Let's discover the instructions on how to reset the service light for routine maintenance on the Toyota CH-R. First, we get into the vehicle and navi…
How to Reset the Maintenance Light on a Toyota C-HR
How to Reset the Maintenance Light on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) How do you reset the maintenance light on a Toyota C-HR? It’s a very simple operation, let’s see how. Turn on the ignition with the button (you will …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos