Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2015 Toyota Verso

Model: Toyota Verso MK 4 - Years 2009-2018
Part: Service warning light

To manually reset the service light on your 2015 Toyota Verso Mk2, follow these steps. First, turn on the ignition and ensure that "Trip A" is displayed. If it is not, press the button on the right side of the dashboard several times until you find it. Then, turn off the ignition. Press and hold the same button used earlier while turning on the ignition again. The display will start to flash. Once it stops flashing, release the button and the reset procedure is complete.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light of the Toyota Verso
How to Reset the Service Light of the Toyota Verso
Toyota Verso (2009-2018 / MK 4) In this new mini guide dedicated to your Toyota Verso Mk2, you will discover how to manually reset the service light (or maintenance light). This pro…
How to Reset the Tyre Pressure Warning Light on a Toyota Verso?
How to Reset the Tyre Pressure Warning Light on a Toyota Verso?
Toyota Verso (2009-2018 / MK 4) To reset the tyre pressure warning light on a Toyota Verso, inflate all the tyres to the recommended pressure value: this value is indicated on the s…
How to Reset the Tyre Pressure Light on a Toyota Verso
How to Reset the Tyre Pressure Light on a Toyota Verso
Toyota Verso (1995-2002 / MK 1) When your vehicle indicates a tyre issue, the first thing you must do is check all four tyres to identify the problem. This ensures the safety of you…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos