Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulbs on the Toyota RAV4?

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the brake light bulbs on the Toyota RAV4, a very simple and quick operation. You will not need any special tools for this.

First, open the tailgate, then locate the small panel near the back of the light. Once opened by unlocking the two side clips, extract the brake light holder, which is the one positioned at the top, by turning it approximately 45 degrees counterclockwise.

Finally, insert the replacement bulb, avoiding direct contact with it using bare hands.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Light Bulbs on a Toyota RAV4?
How to Replace the Brake Light Bulbs on a Toyota RAV4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In this tutorial, you will learn how to replace the brake light bulbs on a Toyota RAV4. For this simple and quick task, you will not need any special…
Replacing the Rear Light of the Toyota RAV4
Replacing the Rear Light of the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Below are the main instructions for removing and replacing the front light and its bulbs of the Toyota RAV4. First, open the rear tailgate and start …
How to deactivate the Start & Stop feature in the Toyota RAV4?
How to deactivate the Start & Stop feature in the Toyota RAV4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this tutorial, we can see how to deactivate the Start & Stop feature in the Toyota RAV4, an extremely simple and quick operation to be carried out…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos