Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : How to reset the engine light of the Toyota Corolla 2012

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Instrument cluster
Operation: How to reset the engine light of the Toyota Corolla 2012

In this our new guide dedicated to all of you owners of a Toyota Corolla Mk3 (year 2012) we will find out how to manually reset the orange engine warning light. Thanks to the following guide, in fact, you will be able to complete the recovery without using a professional diagnostic tool. First make sure that your Toyota Corolla is off, then locate the button located next to the fuel gauge and hold it down. At the same time, start the picture. After about 20 seconds, release the button and turn off the ignition to complete the procedure.


Posted on 22 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Corolla 2019-2026 - How do you reset the tire pressure light on a Toyota Corolla? Read Answer
    • Corolla 2013-2019 - How do you reset the tire pressure warning light on a Toyota Corolla Mk4? Read Answer
    • Corolla 2006-2013 - What does the warning light with a Toyota Corolla 3 wrench mean? Read Answer
    • Corolla 2019-2026 - What does the PS light on Toyota Corolla mean? Read Answer
    • Corolla 2013-2019 - How does the tire pressure gauge work on Toyota Corolla? Read Answer
    • Corolla 2019-2026 - What to do when the Toyota Corolla tire pressure warning light comes on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos