Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Check and Replacement

Model: Toyota Avensis MK 1, T220 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

Inside the engine compartment, at the front left corner, just behind the headlamp, is the fuse box: by removing the protective cover (press on the fastening tab to unclip it), you can access the panel where the fuses are attached (their function is to protect various devices); below the cover is a diagram illustrating the correspondence between the fuse position and the element under protection.

To check the integrity of the fuses, there are several methods: the simplest is to pull the fuse from its socket using tweezers and check the integrity of the internal filament; if the filament is broken, replace the fuse with one of the same amperage.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Fuse Diagram and Layout for the Toyota Avensis
Fuse Diagram and Layout for the Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) This article illustrates the layout and positioning of the fuse boxes in the Toyota Avensis. First, get into the vehicle on the passenger side and be…
Fuse Box Diagram for the Toyota Avensis MK2
Fuse Box Diagram for the Toyota Avensis MK2
Toyota Avensis (2003-2008 / T250, MK 2) In this brief guide, you will find the positioning and diagram of the fuse box on the second series Toyota Avensis, following these simple steps. Fir…
Check Starter Motor Functionality
Check Starter Motor Functionality
Toyota Avensis (2003-2008 / T250, MK 2) Once the starter motor is removed (disconnect the battery during removal), you can test its functionality on the bench using a booster or a battery: …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos