Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Succeed
  6. : How do you replace the cabin filter on Toyota Succed

Toyota Succeed - Video tutorial

Model: Toyota Succeed Xp160 - Years 2014-2020
Part: Cabin air filter
Operation: How do you replace the cabin filter on Toyota Succed

In this video tutorial you can see how to replace the cabin filter on Toyota Succed, by following a few simple steps that will guide you towards correct management of your vehicle, working independently. You need an unscrewer, a screwdriver, a cutter. Start by unscrewing the screws with the screwdriver to remove the dashboard located on the passenger side. Once you have taken off the cover; at this point you have to remove the old filter holder using a cutter. Now clean the dust that has formed and install the new filter holder and reassemble all the parts by proceeding in reverse order.


Posted on 23 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos