Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Succeed
    4. : Replace the Toyota Succeed engine oil and oil filter

Toyota Succeed - Video tutorial

Model: Toyota Succeed Xp160 - Years 2014-2020
Part: Engine oil
Operation: Replace the Toyota Succeed engine oil and oil filter

We see below the guide necessary to replace the engine oil and the oil filter, carrying out the regular maintenance service, of the Toyota Succeed. First of all we lift the car and start unscrewing the oil vent bolt that we find under the engine, using a 14 mm star or socket wrench; let the oil drain into a container, as shown in the video. At this point we remove the oil filter with the appropriate key, replacing the cartridge with the new one; finally, we top up, following the video tutorial to the end!


Posted on 28 May 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos