Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : How to remove the Toyota Corolla cigarette lighter

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Cigarette Lighter
Operation: How to remove the Toyota Corolla cigarette lighter

In today's video tutorial we will see how to disassemble and replace the Toyota Corolla cigarette lighter, following the instructions below. First we get on board the car and start removing the two plastic covers that we find on the sides of the central instrumentation; after which we remove the plastic cover that we find on the base of the gearshift gaiter, as shown in the video. At this point we unscrew the screws of the cigarette lighter bulkhead, disconnecting the electrical connector that we find below to remove it; we install if we turn the USB socket or reassemble the cigarette lighter!


Posted on 7 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Corolla 2019-2026 - What is the purpose of the AM1 fuse in the Toyota Corolla? Read Answer
    • Corolla 2013-2019 - Why doesn't the cigarette lighter plug on my Toyota Corolla 4 work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos