Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Drive Belt on a Toyota Aygo?

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: V-belt

To replace the drive belt on a Toyota Aygo, lift the car to completely remove the front right wheel. By loosening the screws that secure the wheel arch, you can remove its inner cover, gaining access to the drive belt. This belt must be slipped off the pulleys by removing the tensioner pulley. This way, the belt can be removed and replaced with a new spare part. After installation, refit the front right wheel and the corresponding wheel arch.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Aygo (2005-2014 / MK 1, Ab10) To replace the serpentine belt on a Toyota Aygo, lift the car so you can remove the front right wheel. By unscrewing the screws that secure the wheel…
Toyota Aygo (2005-2014 / MK 1, Ab10) In order to replace the serpentine belt of the Toyota Aygo, you need to lift the car, unscrew the screws that secure the inner panel of the wheel arc…
Toyota Aygo (2014-2023 / Ab40, MK 2) Replace the rear-view mirror on a Toyota Aygo. Here’s how to remove the mirror from its mount. Use a lever between the perimeter of the mirror frame …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos