Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Temporarily Disable the Seatbelt Alarm of the Toyota Aygo

Model: Toyota Aygo MK 1, Ab10 - Years 2005-2014
Part: Checks and maintenance

This guide shows you how to temporarily disable the seatbelt alarm of the Toyota Aygo; remember that the seatbelt must always be worn, and this procedure is provided for informational purposes only. Get into the vehicle and turn on the ignition; then press and hold the button on the instrument panel for about ten seconds while inserting the seatbelt. At this point, turn off the ignition and remove the seatbelt, then turn the ignition and engine back on; you will see that the alarm has been deactivated!

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Immobiliser on a Toyota Aygo?
How to Disable the Immobiliser on a Toyota Aygo?
Toyota Aygo (2005-2014 / MK 1, Ab10) To disable the immobiliser on a Toyota Aygo, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashb…
In the Toyota Aygo, how do you reset the Service light?
In the Toyota Aygo, how do you reset the Service light?
Toyota Aygo (2005-2014 / MK 1, Ab10) The reset of the Service light in the Toyota Aygo, but in general for any car, must be the result of carrying out scheduled maintenance and changing …
How to Reset the Oil Light on the Toyota Aygo X 2023
How to Reset the Oil Light on the Toyota Aygo X 2023
Toyota Aygo (2021-2026 / MK 3, Aygo X) In this guide, we will explain the various steps you need to follow to manually reset the oil light on your Toyota Aygo X (2023). First, start the in…

Other guides you may be interested in

    Frequently Asked Questions

    • Aygo 2005-2014 - Where is the fuel tank of a Toyota Aygo located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos