Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Car Radio in the Toyota iQ

Model: Toyota Iq MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

Video tutorial

In today's video, learn how to replace the original car radio in the Toyota iQ. First, disassemble the centre console surrounding the climate control buttons. Once done, proceed to remove the radio frame.

At this point, disconnect the power connector and then extract the old car radio. You can then insert the new unit and test the component.

If everything is okay, you can say the job is finished. Check if you have steering wheel controls and if you need an additional module for their operation.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Where Are the Fuses Located in the Toyota Iq?
Where Are the Fuses Located in the Toyota Iq?
Toyota Iq (2008-2015 / MK 1) The fuses in the Toyota Iq are located within the two fuse boxes present in the vehicle: in this type of car, the first box can be found in the lower…
How to Replace the Cabin Filter in a Toyota IQ?
How to Replace the Cabin Filter in a Toyota IQ?
Toyota Iq (2008-2015 / MK 1) As shown in this tutorial, replacing the cabin filter in a Toyota IQ is a very simple and economical task. First, sit in the passenger seat, then uns…
How to Replace the Battery in a Toyota IQ Key
How to Replace the Battery in a Toyota IQ Key
Toyota Iq (2008-2015 / MK 1) In this video, you will learn how to replace the battery in a Toyota IQ key. Open the packaging of the replacement batteries. Open the remote by pres…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos