Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Serpentine Belt on the Toyota Camry 2.4L

Model: Toyota Camry Xv40 - Years 2006-2013
Part: V-belt

In this brief and simple guide, discover the procedure to remove and replace the serpentine belt or the V-belt on the Toyota Camry 2.4L. First, lift the vehicle and start by removing the right front wheel, then remove the wheel well liner. Next, use a socket wrench with an extension to loosen the tensioner, then remove the serpentine belt as shown in the video. At this point, install the new V-belt, ensuring it matches the original, installing it in the correct direction and applying the reverse procedure!

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on a Toyota Camry 2.4L
How to Replace the Serpentine Belt on a Toyota Camry 2.4L
Toyota Camry (2006-2013 / Xv40) In this guide, see how to remove and replace the serpentine belt or V-belt on a Toyota Camry with a 2.4-liter engine. First, lift the vehicle and sta…
How to replace the alternator belt of the Toyota Camry 3.0i V6
How to replace the alternator belt of the Toyota Camry 3.0i V6
Toyota Camry (1997-2001 / Xv20) Today we will discover the instructions and procedure on how to disassemble and replace the serpentine belt or alternator belt of the Toyota Camry 3.…
Guide to Replacing the Timing Belt on the Toyota Camry 2.2L
Guide to Replacing the Timing Belt on the Toyota Camry 2.2L
Toyota Camry (1997-2001 / Xv20) Below are the instructions that will allow you to remove and replace the timing belt on the Toyota Camry 2.2L. First, open the hood of the vehicle an…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos