Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the 12V Battery in a Toyota Corolla Hybrid?

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

In this tutorial, see how to replace the 12V battery in a Toyota Corolla Hybrid. This operation is extremely simple and quick.

First, ensure the key is not inserted, then open the bonnet, locate the battery, and using a 10 mm socket spanner, loosen the nuts on both terminals before disconnecting them. Once done, unscrew the bolt of the lower mounting bracket with a long 13 mm spanner, lift the battery, and remove it from the housing.

At this point, simply position the replacement and follow the reverse procedure.


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Toyota Corolla Hybrid
How to Replace the Battery in a Toyota Corolla Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) To replace the battery in a Toyota Corolla Hybrid, open the bonnet to access the components inside the engine bay. On the right side, you will find t…
How to reset the service in the Toyota Corolla Hybrid?
How to reset the service in the Toyota Corolla Hybrid?
Toyota Corolla (2019-2026 / MK 5, E210) In this tutorial, we can see how to reset the service in the Toyota Corolla Hybrid, an extremely simple and quick operation, to be carried out only o…
Fuse Diagram and Layout for the Toyota Corolla 1.8 Hybrid
Fuse Diagram and Layout for the Toyota Corolla 1.8 Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) Below are the diagram and layout of the fuses for the Toyota Corolla 1.8 Hybrid, following the instructions provided. First, open the bonnet and loca…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos