Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Glanza
  6. : How to wrap on Toyota Glanza?

Toyota Glanza - Video tutorial

Model: Toyota Glanza MK 1 - Years 2019-2024
Part: Accessory Kit
Operation: How to wrap on Toyota Glanza?

Car wrapping is nothing more than the operation consisting in the application of special films on the bodywork or interior of a car to make it unique and original, adapt it to one's taste and align it with one's personality. In this video we are shown how to wrap the outer body of a Toyota Glanza but we can use the same procedure for any type of car. We buy the special film of the color that we like best and apply it, with the car clean, on the various parts of the bodywork. We eliminate the air bubbles, cut off the excess and carefully finish the edges. The procedure takes time and patience but it is not difficult.


Posted on 20 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos