Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Differential Oil on a Toyota Land Cruiser

Model: Toyota Land Cruiser MK 7, J80 - Years 1990-1997
Part: Differential

Let's see how to change the oil on a Toyota Land Cruiser; it is a very simple job, just have the right tools, such as the keys to open the fill and drain plugs, but the size depends on your vehicle model. In the case of our YouTuber, it is a J80 model, and a 24mm socket is required. A crucial tool is a syringe to inject the new oil into the differential. You can find it on Amazon with code B003E37HTW for £15.04, with free delivery. When replacing the oil, it is good practice to also replace the seals of the differential plugs. The type of oil to buy can be found in the user and maintenance manual, as it varies from model to model. Also, get a container to drain the used oil: it will then be disposed of at an authorised centre. Remove the oil fill plug, then the drain plug (clean the plug first). When all the oil has drained, replace the drain plug, and using the syringe, refill the oil into the differential through the fill plug. When oil comes out of the fill hole, it means the differential is full. Place the new seal and tighten the plug. In the following days, check for any leaks!

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Land Cruiser (2021-2026 / J300) In this short guide, we will see the instructions that will allow us to change the time of the Toyota Land Cruiser. First of all, we get into the car…
Toyota Land Cruiser (2007-2021 / J200, MK 11) In this mini guide for your 2021 Toyota Land Cruiser, we will describe all the steps necessary to correctly complete the manual reset of the oil warn…
Toyota Land Cruiser (2021-2026 / J300) Today, let's discover how to perform the reset procedure for the service light indicating routine maintenance for the engine oil change on the Toyota…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos