Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rush
    4. : Replacing the front brake pads on the Toyota Rush

Toyota Rush - Video tutorial

Model: Toyota Rush J200, F700 - Years 2006-2017
Part: Brake pads
Operation: Replacing the front brake pads on the Toyota Rush

Today we will see, in this short and simple guide, how to disassemble and replace the front brake pads, but also the rear ones, of the Toyota Rush. First we raise the car and start disassembling the front wheel; then we unscrew the fixing screws of the brake caliper, which we find on the back, in order to remove it from the disc, as shown in the video. At this point we press on the caliper piston, thus removing the old brake pads; let's clean the caliper of residual dirt and reassemble the new brake pads, following the video until the end!


Posted on 1 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos