Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Verso
    4. : How do you set the clock on the Toyota Verso?

Toyota Verso - Video tutorial

Model: Toyota Verso MK 4 - Years 2009-2018
Part: Checks and maintenance
Operation: How do you set the clock on the Toyota Verso?

To set the clock on the Toyota Verso, you need to turn on the instrument panel: then you will need to hold down the DISP button located on the right-hand side of the steering wheel for a few seconds, until the word "SETTINGS" appears on the instrument panel. Now you need to hold down the DISP button again until the word "CLOCK" appears: by holding down the button again, you will be able to modify the hours and minutes using the controls on the steering wheel. After the time has been entered, you can verify that the modification has been made correctly.


Posted on 10 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Verso 2009-2018 - After how many kilometers should the first service of the Toyota Verso 2 be done? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos