Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Apply Decorative Plastic Trim on the Sides and Headlights of the Toyota Hilux

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Body

See other generations:
Video tutorial

In this video, you will learn how to apply decorative plastic trim on the sides and headlights of the Toyota Hilux. Once you purchase the decorations for the headlights, make sure to clean the surfaces where you want to attach the decorations thoroughly.

Peel the backing off the adhesive and press the trim into place to ensure a good bond. Do the same with the plastic trim for the sides.

Clean the surfaces well to remove dust and other impurities, then position the trim against the sides. After determining the height at which you want to apply them, remove the backing from the adhesive and place the trim on the sides.

Press down on the trim to ensure it adheres perfectly to the surfaces.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to change the gear knob of a Toyota Hilux
How to change the gear knob of a Toyota Hilux
Toyota HiLux (1997-2005 / N160, N140, N150, N170) In today's video tutorial, we are shown the entire procedure necessary to follow in order to change the gear shift knob of a Toyota Hilux, MK6 model …
How to Reset the "Service" Light on a Toyota Hilux?
How to Reset the "Service" Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) Hello, today’s goal is to reset the "Service" light on our Toyota Hilux. Start by sitting in the driver’s seat. Once seated, press the ignition butto…
Where are the fuses located in the Toyota Hilux?
Where are the fuses located in the Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) The fuses in the Toyota Hilux are divided between two fuse boxes located in the vehicle: the first is inside the cabin, in the dashboard area just be…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos