Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Fortuner
    4. : Where are the fuses located in the Toyota Fortuner?

Toyota Fortuner - Video tutorial

Model: Toyota Fortuner An50, An60 - Years 2005-2015
Part: Fuse box
Operation: Where are the fuses located in the Toyota Fortuner?

In this video, we can see the location of the fuse boxes and their respective diagrams in the Toyota Fortuner, useful in case we need to check the status of a malfunctioning device's fuse. As shown, the first box is located inside the cabin, specifically behind the panel located under the steering column. The second box is also located inside the cabin and is positioned behind the passenger's glove compartment. The third and final box is located inside the engine compartment, protected by the plastic cover located right behind the battery.


Posted on 5 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Fortuner 2005-2015 - Where is the fuse for the Toyota Fortuner's cigarette lighter located? Read Answer
    • Fortuner 2015-2023 - Where are the fuses located in the Toyota Fortuner? Read Answer
    • Fortuner 2015-2023 - Where is the air conditioning fuse located in the Toyota Fortuner? Read Answer
    • Fortuner 2005-2015 - Where is the fuse for the Toyota Fortuner's cigarette lighter located? Read Answer
    • Fortuner 2005-2015 - Where is the cigarette lighter fuse located in the Toyota Fortuner/Hilux? Read Answer
    • Fortuner 2015-2023 - Where is the fuse box located in the Toyota Fortuner? Read Answer
    • Fortuner 2015-2023 - What is the location of the horn relay on the Toyota Fortuner? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos