Do it yourself
| ||||
|
Toyota Iq - Video tutorial
Model: Toyota Iq
MK 1
- Years 2008-2015 In order to replace the door panel of the Toyota IQ, you need to use an object to pry off the trim that runs along the armrest. Once the trim is removed, you can loosen all the screws beneath it. This will release the door panel from its housing and allow you to completely detach it. At this point, you can install the new panel and secure it with the corresponding screws. Finally, you need to reposition the trim and make sure all components are properly fastened.
Posted on 24 May 2023 by ScegliAuto
Other guides that may interest you
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |