Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Toyota IQ?

Model: Toyota Iq MK 1 - Years 2008-2015
Part: Service warning light

To reset the Service light on the Toyota IQ, turn on the instrument cluster and then press the button to the left of the steering wheel until "Trip B" appears on the display. At this point, turn off the instrument cluster and press the button again. While holding it, insert the key into its slot and turn it to switch on the instrument cluster. After a few seconds, you will see that the Service light has been successfully reset, and you can release the button.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Toyota IQ
How to Reset the Service Light on a Toyota IQ
Toyota Iq (2008-2015 / MK 1) To reset the service light on a Toyota IQ, press the button located just below the central display after turning the key to the 'on' position. You wi…
How to Reset the Service Light on a 2009 Toyota IQ
How to Reset the Service Light on a 2009 Toyota IQ
Toyota Iq (2008-2015 / MK 1) To manually reset the service light on your 2009 Toyota IQ, follow these simple steps. First, get inside the vehicle and turn on the ignition. Once d…
How do you reset the Service light of the Toyota IQ?
How do you reset the Service light of the Toyota IQ?
Toyota Iq (2008-2015 / MK 1) On the instrument panel of the Toyota IQ, the Service light that will be displayed can be reset by pressing and holding the button on the right side …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos