Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Iq
  6. : How to replace the battery of the Toyota Iq remote control.

Toyota Iq - Video tutorial

Model: Toyota Iq MK 1 - Years 2008-2015
Part: Key
Operation: How to replace the battery of the Toyota Iq remote control.

If the battery of our car remote control has run out, we can proceed with its replacement by following the instructions and procedure that are reported below, which will allow us to simplify the work to carry it out correctly. First, it is necessary to extract the emergency key and then use the same key to lever it in its seat and release the back cover. After removing the cover, we find the battery that we can also remove with a pointed object and then replace it with the new one, keeping the position of the positive pole facing upwards. Then close the remote control cover and proceed to reinsert the emergency key.


Posted on 23 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos