Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located on the passenger side, behind the glove compartment: to replace it, you must remove the glove compartment itself; open the glove compartment door, unclip the side rod that acts as a stop, and press on the sides of the compartment to fully tilt it and then remove it; at this point, you can access the air duct, remove the cap from the filter container, extract the old one, ensure there are no dirt residues, and insert the new one respecting the direction of the airflow.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter
Replacing Cabin Air Filter
Toyota Prius (2009-2015 / Xw30, MK 2) .. direction; reapply the cap and the flap. After replacing the cabin air filter, it is recommended to also sanitise the cabin using the appropriate spray... …
Replacing Cabin Air Filter
Replacing Cabin Air Filter
Toyota Prius (2004-2009 / MK 1) The cabin air filter is located inside the cabin, on the passenger side, just behind the glove compartment. Open the glove compartment and unclip the…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Toyota Prius (2004-2009 / MK 1) The cabin air filter is located on the passenger side, just behind the glove compartment. To access the filter housing, open the glove compartment do…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos